Done with your pool? We demolish it completely — shell, plumbing, deck — and restore the yard so you can use the space again. Full excavation or fill-in, we handle permits, heavy equipment, haul-off, and site restoration from start to finish.
Most pool demo contractors show up, break concrete, and leave. They've never seen the pool before, don't know where the plumbing runs, and aren't thinking about what happens to the yard after they're gone.
We're different because we already know your pool. If we've done leak detection, repair, or deck work on it, we know the plumbing layout, the shell condition, and the soil situation — before the excavator arrives. That's not something a demo-only company can offer.
We demolish the full pool structure using an excavator and skid steer, haul off every piece of debris, and restore the site — whether that means gravel fill, topsoil and sod, or a concrete slab. We also handle the city permit, so you're not chasing paperwork.
With over 20,000 repairs and concrete projects completed across DFW, we've worked in these yards, under these slabs, and in this clay soil. We know what a proper fill and compaction looks like — and what causes a yard to sink three years after a bad demo job.
Get a Demolition QuotePool removal isn't one-size-fits-all. The right option depends on your plans for the space, your timeline for selling, and your budget. We assess the site and give you a clear recommendation before quoting either option.
The top portion of the shell is broken up and demolished. The debris is pushed to the bottom of the pool cavity, drainage holes are punched through the floor, and the void is filled with gravel and compacted dirt. The remaining shell stays buried underground.
Important: Partial removal must be disclosed to future buyers in Texas. You cannot build a permanent structure (room addition, garage, ADU) on top of a partial fill. If you plan to sell within a few years, full excavation is the better investment.
The entire pool shell is broken up, removed from the site, and hauled off. The cavity is backfilled with engineered clean fill, compacted in lifts to 90–95% compaction density. The yard is graded level. Nothing is left underground.
Full removal costs more upfront but removes every long-term complication — disclosure requirements, building restrictions, and the risk of settling or drainage issues from buried debris.
Once the pool is out and the cavity is filled and compacted, the site needs to be finished. We handle the full restoration — you tell us what the yard should look like when we're done.
The cavity is filled with clean gravel and compacted fill dirt, layered in 8-inch lifts and mechanically compacted at each stage. Proper compaction is what prevents the site from sinking or settling after the job is done. This is the foundation of every restoration option.
After compaction, we add a topsoil layer, grade the site level, and finish with sod or seeded grass. The yard looks like the pool was never there. This is the most common finish for homeowners who want outdoor living space, a garden area, or a clean backyard for kids and pets.
After full excavation and proper compaction, the site can be poured as a concrete slab — broom finish, stamped, or standard — creating a patio, extended entertainment area, or a clean hardscape where the pool used to be. We pour the concrete as part of the same project scope.
Pool demolition is a permitted, sequenced job — not just breaking concrete and filling dirt. Every step matters for the long-term stability of the site.
We assess the pool, its plumbing, the surrounding deck, and site access. We confirm which removal option fits your situation and give you a clear written quote — full excavation vs. fill-in, and what the site restoration will include. No surprises when the job starts.
Most cities in DFW — including Dallas, Plano, Allen, Frisco, and others — require a demolition permit before pool removal begins. We pull the permit on your behalf, handle the application, and coordinate the required inspections. You don't have to deal with the city.
Before demolition begins, all pool utilities are properly disconnected and capped — electrical lines to the pool equipment and lights, gas lines if applicable, and plumbing connections at the equipment pad. This is a code requirement and a non-negotiable safety step before the excavator moves in.
The pool is drained. We bring in the excavator and skid steer and begin breaking up the shell — concrete, gunite, or fiberglass — systematically and with controlled equipment to protect the surrounding yard, fence line, and any structures near the pool.
For full excavations, all debris — broken concrete, rebar, piping, tile — is loaded and hauled off the property completely. Nothing is buried on-site. For fill-ins, debris is managed and staged within the cavity before fill begins.
Clean fill is added in 8-inch lifts and mechanically compacted at each stage — reaching 90–95% compaction density. This is what prevents settling. The site is then graded and finished to your specification — sod, topsoil, or concrete pour.
Excavator — breaks up concrete shell and removes debris efficiently.
Skid Steer (Bobcat) — moves material within the site without damaging the yard.
Haul-Off Trucks — everything removed and disposed of properly off-site.
Pool demolition in DFW requires a permit from your city's building or development services department before any work begins. In Dallas, that's Dallas Development Services. Every city is different — Allen, Plano, Frisco, McKinney, Carrollton, and others each have their own requirements and timelines.
Skipping the permit is not worth the risk. Work done without a permit can result in fines, forced re-excavation, failed home inspections when you sell, and title issues that complicate closing. A properly permitted and inspected demolition is a documented record that the work was done correctly — which protects you at resale.
We handle the permit application on your behalf — submit the documentation, coordinate the required inspections, and ensure the job is compliant with your city's building codes from start to finish.
Demolition scope — what is being removed and how.
Utility disconnections — licensed capping of electrical, gas, and plumbing connections.
Fill and compaction requirements — engineered fill materials and compaction standards.
Pre-backfill inspection — inspector verifies drainage and demolition before fill goes in.
Final inspection — inspector confirms site is safe, stable, and code-compliant before the job closes.
Any repair or structural work performed as part of or alongside the demolition project carries the same written warranties we put on every job. Warranties are transferable to new homeowners at no additional cost.
Yes — in virtually every city in DFW, a demolition or building permit is required before pool removal begins. Dallas, Plano, Frisco, Allen, McKinney, Carrollton, and other municipalities all require permits. We handle the permit application, coordinate inspections, and ensure the job is compliant with local building codes. You don't need to deal with the city directly.
Partial removal (fill-in) breaks up the top portion of the shell, punches drainage holes in the floor, and fills the cavity with debris and dirt. The bottom shell stays underground. It's less expensive and faster, but you must disclose it when selling and cannot build a permanent structure over the area. Full excavation removes everything — the entire shell is demolished and hauled off, the cavity is filled with engineered clean fill compacted to code. The site is fully buildable, requires no disclosure, and has no buried debris risk.
Partial fill-in typically takes 2 to 3 days of active work. Full excavation takes 5 to 7 days depending on pool size, access, and site conditions. Add 1 to 2 weeks before work begins for permit approval — this varies by city. We give you a clear timeline in the written quote before work begins.
We use an excavator to break up and remove the concrete shell, a skid steer (Bobcat) for material movement within the site, and haul-off trucks to remove debris from the property. For tight access situations — narrow gates, limited yard space — we assess the access during the site visit and determine the right equipment configuration before quoting.
Not if the fill and compaction are done correctly. The most common cause of post-removal settling is inadequate compaction — fill dumped in all at once rather than added in lifts and mechanically compacted at each stage. We compact fill in 8-inch lifts to 90–95% compaction density, which is the standard required by most city permits. A properly permitted job with inspected compaction gives you a documented record that the work was done to code.
After full excavation with proper compaction, yes — the site is buildable for structures including room additions, garages, and accessory dwelling units, subject to your local zoning and building codes. After a partial fill-in, the area cannot support permanent structures. It can be used for lawn, garden, or patio but not for anything with a foundation.
In Texas, a partial removal (fill-in) must be disclosed to potential buyers because the shell remains underground. Full excavation with proper permitting and a clean fill does not carry the same disclosure requirement — and leaves no buried structure for a buyer or inspector to find. If you're planning to sell within the next several years, full excavation is almost always the better investment.
After fill and compaction, we can finish the site with topsoil and sod for a grass lawn, topsoil and seed, gravel for a low-maintenance surface, or a poured concrete slab for a patio or hardscape area. We handle the full site restoration as part of the same project — you don't need a separate contractor for the yard work or the concrete.
Partial fill-in typically runs $5,000–$8,000 for an average-sized inground pool in DFW. Full excavation typically runs $8,500–$12,000 depending on pool size, material, site access, and fill-finish option. Permit fees for Dallas and surrounding cities typically add $250–$600. We provide a clear itemized written quote after the site visit — no ranges, no vague estimates.
The most common reasons we see are: the pool is beyond cost-effective repair (old concrete, significant structural cracks, failed plumbing), the homeowner wants to reclaim the yard space for family use, the pool has become a safety concern, the homeowner is preparing to sell and the pool is deterring buyers, or ongoing maintenance costs — chemicals, equipment, cleaning, and insurance — have become a burden. Removing a pool eliminates all of those costs immediately.
Tell us about the pool and the yard, and we'll come out, assess the site, and give you a written quote for the full scope — permit, demo, haul-off, and site restoration.
